How many lifts per apartment does a residential building need? There is no fixed ratio, but a first estimate in a mid-rise block usually lands at about one lift for every 40 to 90 apartments, and never fewer than 2 lifts once a block reaches 4 storeys or more. The real answer depends on how many people live in each apartment, how tall the building is and the service standard you design to, which is why elevator consultants start from population rather than unit count.
This guide sets out the occupancy factors used for each apartment type, the design criteria that turn a population into a number of lifts, indicative rules of thumb by building height, the minimums that UK and Asian codes add on top, and the point at which a rule of thumb stops being good enough and you need a simulation.
How Many Lifts per Apartment: The Short Answer
As a starting point, plan for at least 2 lifts in any block of 4 storeys or more, then allow roughly one lift per 40 to 90 apartments as the building gets taller. Above about 30 floors, the interval rather than the unit count usually decides when a third lift is needed.
That range comes from a simple up-peak calculation, not from a code, and it hides a lot. A block of large family apartments has far more residents than a block of studios with the same number of front doors. A luxury scheme is designed to shorter waiting times than social housing. And the minimum of 2 lifts is driven by resilience and fire evacuation, not by traffic: one lift can often carry a small block’s traffic, but when it breaks down, residents on the upper floors have no step-free way home.
So the honest answer to “how many lifts per apartment” is a sequence: count the people, choose the service standard, run the calculation, then apply the minimums. The rest of this guide works through each step. For the same approach across offices, hotels and other building types, see our guide to how many elevators a building needs.
Start With the Population: Occupancy Factors per Apartment Type
Residential lift design starts by converting apartments into people. CIBSE Guide D gives occupancy factors per apartment type, from 1.0 person for a luxury studio to 6.0 people for a 3-bedroom social apartment, so 100 apartments can house anywhere from about 100 to 600 people.
The factors widely used in UK and Irish lift reports, taken from CIBSE Guide D, are:
- Studio: 1.0 (luxury), 1.5 (normal), 2.0 (social)
- 1 bedroom: 1.5 (luxury), 1.8 (normal), 2.0 (social)
- 2 bedroom: 2.0 (luxury), 3.0 (normal), 4.0 (social)
- 3 bedroom: 3.0 (luxury), 4.0 (normal), 6.0 (social)
The categories reflect who lives there. Luxury apartments tend to be under-occupied, with fewer people than bedrooms and many units used part-time. Social housing tends to be fully occupied, with families and shared bedrooms. Normal market housing sits between the two. Getting this step right matters more than any other in working out how many lifts per apartment a scheme needs.
To find the building population, multiply the number of each apartment type on each floor by its factor and add them up. A floor of two 1-bedroom, three 2-bedroom and one 3-bedroom normal apartments holds about 16.6 people. Twenty such floors give a population of about 332.
Two practical points matter here. First, count floor by floor, because the population distribution affects the calculation, and a floor of penthouses behaves differently from a floor of studios. Second, treat mixed-use buildings separately: the residential floors, the hotel floors and any offices each have their own population and criteria, even if they share a core. Our guide to how many people fit in a lift explains the other half of the sum, which is how many of those residents a car can actually carry.
Residential Design Criteria: Handling Capacity, Interval and Waiting Time
Residential buildings are designed to less demanding targets than offices. ISO 8100-32 gives typical residential criteria of an up-peak handling capacity of at least 6% of the population in 5 minutes and an interval of 60 seconds or less, compared with 12% and 30 seconds for offices.
CIBSE Guide D takes a slightly different approach. Rather than a single residential figure, it varies the target with the type of occupancy, and it uses a two-way handling capacity, because residential peaks mix people leaving and arriving:
- Luxury: 8% handling capacity, average waiting time of 40 seconds or less
- Normal: 6% to 8% handling capacity, average waiting time of 48 seconds or less
- Social: 5% to 7% handling capacity, average waiting time of 56 seconds or less
The reason residential targets are lower is that demand is spread out. An office fills in a sharp morning peak; an apartment block has a gentler evening peak, when residents come home, go out and receive deliveries in roughly equal numbers. That is also why the interval, not the handling capacity, usually governs residential design. In most of the examples later in this guide, two lifts can move far more than 6% of the population in 5 minutes, but a single lift cannot get back to each floor within 60 seconds.
Which set of criteria should you use? On a UK project, CIBSE Guide D is the usual reference and matches the occupancy category of the scheme. On international projects, ISO 8100-32 gives a recognised baseline. Either way, state the criteria in the report. Our guide to lift performance criteria explains how each metric is defined and read.
How Many Lifts per Apartment by Building Height
Under typical assumptions, a residential block needs 1 lift for traffic up to about 8 floors, 2 lifts from about 12 to 30 floors, and 3 lifts at around 40 floors. That works out at roughly 36 to 90 apartments per lift, before the resilience and fire minimums are added.
The figures below come from a classical up-peak calculation run to the ISO 8100-32 residential criteria (at least 6% handling capacity and an interval of 60 seconds or less). The assumptions are 6 apartments per floor, an average of 2.4 people per apartment, a 3.0 m floor-to-floor height, 1,000 kg (13-person) cars, a single entrance floor and speeds that rise with the building’s height.
| Residential floors | Apartments | Speed | Lifts for traffic | Interval | Apartments per lift |
|---|---|---|---|---|---|
| 8 | 48 | 1.0 m/s | 1 | 45 s | 48 |
| 12 | 72 | 1.6 m/s | 2 | 16 s | 36 |
| 16 | 96 | 1.6 m/s | 2 | 29 s | 48 |
| 20 | 120 | 2.0 m/s | 2 | 37 s | 60 |
| 25 | 150 | 2.5 m/s | 2 | 46 s | 75 |
| 30 | 180 | 3.0 m/s | 2 | 56 s | 90 |
| 40 | 240 | 4.0 m/s | 3 | 34 s | 80 |
Read the table as a first estimate, not a design. Three things stand out. First, the jump from 1 to 2 lifts happens early, at around 10 to 12 floors, because a single lift’s round trip becomes too long for a 60-second interval. Second, from about 12 to 30 floors, the same 2 lifts keep working because the cars are lightly loaded, often carrying only 1 to 5 people per trip in the peak. Third, at about 30 floors the interval approaches 60 seconds, so a taller or denser building, or a higher service standard, needs a third lift.
Change any assumption and the answer moves. Eight apartments per floor instead of six, larger families, a luxury specification or a second entrance floor from a car park will each push the count up. You can test your own figures with the lift traffic calculator.
A Worked Example: A 20-Storey Apartment Block
A 20-storey block with 6 apartments per floor has 120 apartments and, using CIBSE normal occupancy factors, about 332 residents. One 13-person lift gives an interval of about 160 seconds and fails. Two lifts at 2.0 m/s bring the interval down to about 42 seconds and pass.
Here is the calculation in steps:
- Population. Each floor has two 1-bedroom (1.8), three 2-bedroom (3.0) and one 3-bedroom (4.0) apartments, which gives 16.6 people per floor and about 332 across 20 floors.
- Demand. At 6% in 5 minutes, the lifts must move about 20 people in the peak 5 minutes.
- One lift. A single 1,000 kg car at 2.0 m/s has a round trip of about 160 seconds when loaded, so the interval is about 160 seconds. That is far outside the 60-second target.
- Two lifts. With two cars sharing the demand, each car carries about 3 people per trip, the round trip falls to about 83 seconds, and the interval is about 42 seconds. The group could carry around 12% of the population in 5 minutes, double the target.
- Higher standard. At 8% demand, typical of a luxury scheme, two lifts still give an interval of about 54 seconds. That meets the ISO figure, but a luxury target of a 40-second average wait should be checked by simulation and may justify a third lift.
In this block, the answer to how many lifts per apartment is one lift per 60 apartments: 2 lifts for 120 homes. That also satisfies the resilience and evacuation minimums described next. Note what decided it: not the number of people, which two lifts carry easily, but the time it takes a car to come back.
Why Two Lifts Is the Practical Minimum
In the UK, good practice and fire guidance push most apartment blocks to at least 2 lifts, even when one could carry the traffic. Lifetime Homes guidance recommends access to 2 lifts in blocks of 4 or more storeys, and BS 9991:2024 expects at least one lift to be suitable for evacuation.
The traffic calculation answers how many lifts per apartment are needed on a normal day. The minimums answer what happens on a bad one. The main ones in the UK are:
- Resilience. The Lifetime Homes communal lifts guidance recommends lift access to all dwellings above the entrance level and access to 2 lifts in blocks of 4 or more storeys. Some boroughs go further: Tower Hamlets requires 2 lifts for any accessible housing above the ground floor, because no lift company can guarantee to repair a broken lift within a set time.
- Evacuation. BS 9991:2024 recommends that where a building has a lift for access, at least one lift should be provided for evacuation, whatever the building’s height. In London, Policy D5(B5) of the London Plan asks for at least one suitably sized fire evacuation lift per core in developments where lifts are installed.
- Firefighting. Where the top storey is more than 18 m above fire service access level, which is typically 6 or 7 storeys, the building needs a firefighting lift in a firefighting shaft. In most residential blocks, this is a passenger lift that also serves the firefighting role.
- Second staircase. Residential buildings of 18 m or more now need a second staircase in England, which often brings a second core, and with it at least one more lift.
These rules mean the traffic count is often the smaller number. A 10-storey block that needs only one lift for traffic will usually end up with two, and a building split into two cores will need lifts in each.
Rules of Thumb in Singapore, Hong Kong, Malaysia and India
No major Asian code answers how many lifts per apartment a building needs with a fixed ratio. Singapore, Hong Kong, Malaysia and India set triggers and minimums instead, such as fire lifts above about 15 to 18 m, and leave the count to a traffic calculation based on unit numbers, unit types and storeys.
Singapore. In a written parliamentary answer in April 2025, Singapore’s Ministry of National Development said HDB decides the number of lifts in a residential block based on the number and type of dwelling units, the block layout and the number of storeys. In other words, the public housing authority uses the same inputs as a traffic calculation rather than a single ratio. Typical HDB and condominium blocks have several units per floor around a shared core, which usually makes the interval the deciding factor.
Hong Kong. Hong Kong’s Buildings Department publishes a code of practice for the construction of lift installations, and the Electrical and Mechanical Services Department publishes energy-efficiency guidelines for lifts. Those guidelines accept that the number and capacity of lifts are often set by rule of thumb, but ask designers to aim for the shortest practical interval. High-density towers with 8 or more flats per floor reach the point where two lifts no longer meet the interval earlier than the table above suggests.
Malaysia. Malaysia’s Uniform Building By-Laws require at least one lift in non-residential buildings of more than 4 storeys, and a fire lift (also called a Bomba lift) in buildings over 18 m. Residential lift counts are set by design rather than a by-law ratio, so the calculation approach applies.
India. The National Building Code of India requires lifts and a fire lift in taller residential buildings, with 15 m as the key height. Indian designers usually work out the population from bedrooms per unit (for example, more people for a 3BHK than a 2BHK) rather than a flat figure per dwelling. Our guide to lift requirements in NBC India sets out the clauses in detail.
Across all four markets, the practical sequence is the same: calculate the population from the unit mix, size the group to the interval, then apply the local fire lift and accessibility rules. For towers above about 30 to 40 floors, the questions shift to zoning and speeds, which our guide to lift planning for high-rise buildings covers.
How the Apartment Mix Changes the Answer
The same 120-apartment block can need 2 or 3 lifts depending on who lives there. Social housing has up to 6.0 people in a 3-bedroom unit, so its population can be up to twice that of a luxury block of the same size, while luxury schemes are designed to waiting times up to 30% shorter.
The main mixes behave quite differently:
- Luxury apartments. Low occupancy, often 1.0 to 3.0 people per unit, but a high service standard: an 8% handling capacity and an average wait of 40 seconds or less in CIBSE Guide D. Here the waiting time target, not the population, usually decides the count, and buyers expect larger cars and quieter, faster lifts.
- Normal market and build-to-rent. Medium occupancy and a 6% to 8% target. Build-to-rent schemes also see heavy use from deliveries, moving in and out, and shared amenity floors such as gyms or roof terraces, which add trips that a pure resident count misses.
- Social and affordable housing. High occupancy, up to 6.0 people per 3-bedroom unit, but a lower 5% to 7% target and a 56-second waiting time. Because these schemes often house more residents with reduced mobility, the resilience case for a second lift is especially strong.
- Student and co-living. These are often treated more like hotels than apartments, with one person per bedroom and sharper peaks around lecture times. They need their own population assessment rather than apartment factors.
A building with more than one tenure, such as private floors above affordable floors, should be assessed floor by floor. If the tenures share a core, the lifts must meet the more demanding of the two standards. That is why any answer to how many lifts per apartment should state the occupancy category it assumes.
When to Simulate Instead of Using a Rule of Thumb
Use a rule of thumb for feasibility, then run a simulation once the design is fixed or when the building is unusual. Simulate for any tower above about 20 floors, any scheme with more than one entrance floor, amenity floors or mixed uses, and any luxury project with a waiting time target.
A rule of thumb tells you roughly how many lifts per apartment to allow; a simulation tells you whether that number works. The up-peak calculation behind the table above assumes all passengers start at one entrance floor and travel up. That is a reasonable test for a simple block, but residential traffic is not like that. In the evening, residents arrive from the street and the car park, others leave for the evening, and couriers make short trips to individual floors. A simulation models this two-way pattern directly, and it reports the metrics that matter to residents: how long they wait, and how long the whole journey takes.
Simulation is worth the effort when:
- The building is tall. Above about 20 floors, round trip times grow, and the difference between 2 and 3 lifts becomes a real cost and core-area decision.
- There are several entrance floors. A basement car park, a podium lobby and a street entrance split the arrivals and change the round trip.
- There are amenity floors or mixed uses. A gym, a roof terrace, shops or hotel floors add traffic that the apartment population does not capture.
- The target is a waiting time. CIBSE Guide D’s residential criteria are expressed as average waiting times, which only a simulation can predict properly. Our guide to elevator waiting time vs time to destination explains the difference.
- You are testing resilience. A simulation can show how the building copes with one lift out of service, which is the real test of whether 2 lifts are enough.
AdSimulo’s lift traffic simulation software models each passenger individually, runs the dispatch logic itself and lets you compare configurations side by side, so you can see whether 2 or 3 lifts give residents the waiting times you are designing to. However you run the numbers, the principle is the same: the number of lifts per apartment is an output of the design, not an input, so start from the people, not from the front doors.









